Disconnect and remove an existing electrical fixed appliance and install a new equivalent replacement (not supplied).
Available Options:
Ovens / Cookers.
Hobs.
Cooker Hoods.
Shower Units.
Panel. Plinth or Bathroom Fan Heaters
Heated Towel Rails.
Surface Mount Extractor Fans.
In-Line Extractor Fans.
Included:
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the appliance to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
The new electrical appliance must be suitable and safe.
Not Included:
Assembly/modification of new appliance.
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Alteration to associated systems (e.g. Plumbing for showers, Ventilation for extractor fans etc).
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing electrical fixed appliance. Supply & install a new standard midrange replacement.
The image displayed if for illustrative purposes only, the actual appliance supplied may vary in looks but will have the functions/characteristics as described.
Available Options:
Single Fan Oven.
Free Standing Single Cooker 4-Plate, Grill + Oven.
4-Ring Ceramic Hob.
Integrated Cooker Hood.
Canopy Cooker Hood.
Shower 8.5Kw Unit.
1000w Wall Mounted Panel Heater.
Bathroom Downflow Heater.
Plinth Heater.
Bathroom Heated Towel Rail.
4inch Surface Mount Extractor Fan.
4inch In-Line Extractor Fan.
Included:
Selected replacement appliance.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the appliance to be replaced.
Existing electrical supply must be in a safe and compliant condition.
Electrical supply to the property may need to be interrupted during work.
Not Included:
Assembly/modification of new appliance.
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Alteration to associated systems (e.g. Plumbing for showers, Ventilation for extractor fans etc).
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing light fitting and install either a new internal fitting supplied by your electrician or a light fitting you provide yourself.
Fittings supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual fitting supplied may look different.
Available Options:
Your Own Ceiling Light.
Your Own Wall Light.
6inch Pendant.
Batten Holder.
5ft Strip Light.
6ft Strip Light.
Bathroom IP Rated Ceiling Light.
Bathroom Mirror Shaver Light.
Included:
Selected replacement light fitting if applicable.
Light bulb if the replacement light fitting is supplied by your electrician.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the light fitting to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a light fitting yourself, it must be suitable and safe.
Not Included:
Assembly/modification of the replacement light fitting if not supplied by your electrician.
Light bulb if replacement light fitting is not supplied by your electrician.
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing light fitting and install either a new external fitting supplied by your electrician or a light fitting you provide yourself.
Fittings supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual fitting supplied may look different.
Available Options:
Your Own External Light Fitting (below 2.5m).
Your Own External Light Fitting (above 2.5m).
30w Flood Light (below 2.5m).
30w PIR Flood Light (above 2.5m).
30w Flood Light.
30w PIR Flood Light.
Tall Bulkhead.
Tall PIR Bulkhead
Round Bulkhead.
Round PIR Bulkhead.
Coach Lantern.
PIR Coach Lantern.
Included:
Selected replacement light fitting if applicable.
Light bulb if the replacement light fitting is supplied by your electrician.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the light fitting to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a light fitting yourself, it must be suitable and safe.
Not Included:
Assembly/modification of the replacement light fitting if not supplied by your electrician.
Light bulb if replacement light fitting is not supplied by your electrician
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. conduit / swa).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing light switch faceplate and install either a new faceplate supplied by your electrician or a faceplate you provide yourself.
Light switch faceplates supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual switch supplied may look different.
Available Options:
Your Own 1 Gang Internal Light Switch Faceplate Only.
Your Own 2-3 Gang Internal Light Switch Faceplate Only.
Your Own 4-6 Gang Internal Light Switch Faceplate Only.
Your Own Internal Ceiling Pull Switch.
1 Gang Internal Switch.
2 Gang Internal Switch.
3 Gang Internal Switch.
4 Gang Internal Switch.
6 Gang Internal Switch.
1 Gang Internal Dimmer Switch.
2 Gang Internal Dimmer Switch.
3 Gang Internal Dimmer Switch.
4 Gang Internal Dimmer Switch.
Internal Ceiling Pull Switch.
Included:
Selected light switch faceplate if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the light switch to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a light switch yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing light switch faceplate + backbox and install either a new faceplate + backbox supplied by your electrician or a faceplate + backbox you provide yourself.
Light switch faceplates + backboxes supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual switch + backbox supplied may look different.
Available Options:
Your Own 1 Gang Internal Light Switch Faceplate + Backbox.
Your Own 2-3 Gang Internal Light Switch Faceplate + Backbox.
Your Own 4-6 Gang Internal Light Switch Faceplate + Backbox.
1 Gang Internal Switch + Backbox.
2 Gang Internal Switch + Backbox.
3 Gang Internal Switch + Backbox.
4 Gang Internal Switch + Backbox.
6 Gang Internal Switch + Backbox.
1 Gang Internal Dimmer Switch + Backbox.
2 Gang Internal Dimmer Switch + Backbox.
3 Gang Internal Dimmer Switch + Backbox.
4 Gang Internal Dimmer Switch + Backbox.
Included:
Selected light switch faceplate + backbox if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the light switch to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a light switch + backbox yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing metalclad light switch and install either a new metalclad switch supplied by your electrician or a metalclad switch you provide yourself.
Metalclad light switches supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual switch supplied may look different.
Available Options:
1 Gang Metalclad Light Switch.
2 Gang Metalclad Light Switch.
3 Gang Metalclad Light Switch.
Included:
Selected light switch if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the light switch to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a metalclad light switch yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. conduit / swa).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing external light switch and install either a new external light switch supplied by your electrician or an external light switch you provide yourself.
External light switch supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual switch supplied may look different.
Available Options:
Your Own 1 Gang External Light Switch.
Your Own 2 Gang External Light Switch.
1 Gang External Light Switch.
2 Gang External Light Switch.
Included:
Selected light switch if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the light switch to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying an external light switch yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. conduit / swa).
Replacement of existing glands.
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing internal power outlet faceplate and install either a new faceplate supplied by your electrician or a faceplate you provide yourself.
Power outlet faceplates supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual power outlet supplied may look different.
Available Options:
Your Own Internal Socket Faceplate Only.
Your Own Shaver Socket Faceplate Only.
Your Own Cooker Switch with Socket Faceplate Only.
Your Own Flex Outlet Faceplate Only.
Your Own Cooker Outlet Faceplate Only.
Internal Single Socket Faceplate Only.
Internal Double Socket Faceplate Only.
Internal Triple Socket Faceplate Only.
Internal Single USB Socket Faceplate Only.
Internal Double USB Socket Faceplate Only.
Dual Voltage Shaver Socket Faceplate Only.
Cooker Switch with Socket Faceplate Only.
Cooker Switch with Socket + Neon Faceplate Only.
Fused Flex Outlet Faceplate Only.
Non-Fused Flex Outlet Faceplate Only.
Cooker Outlet Faceplate Only.
Included:
Selected power outlet faceplate only if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the power outlet to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a power outlet yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing power outlet faceplate + backbox and install either a new faceplate + backbox supplied by your electrician or a faceplate + backbox you provide yourself.
Power outlet faceplates + backboxes supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual power outlet + backbox supplied may look different.
Available Options:
Your Own Internal Socket Faceplate + Backbox.
Your Own Shaver Socket Faceplate + Backbox.
Your Own Cooker Switch with Socket Faceplate + Backbox.
Your Own Flex Outlet Faceplate + Backbox.
Your Own Cooker Outlet Faceplate + Backbox.
Internal Single Socket Faceplate + Backbox.
Internal Double Socket Faceplate + Backbox.
Internal Triple Socket Faceplate + Backbox.
Internal Single USB Socket Faceplate + Backbox.
Internal Double USB Socket Faceplate + Backbox.
Dual Voltage Shaver Socket Faceplate + Backbox.
Cooker Switch with Socket Faceplate + Backbox.
Cooker Switch with Socket + Neon Faceplate + Backbox.
Fused Flex Outlet Faceplate + Backbox.
Non-Fused Flex Outlet Faceplate + Backbox.
Cooker Outlet Faceplate + Backbox.
Included:
Selected power outlet faceplate + Backbox if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the power outlet to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a power outlet + backbox yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing metalclad power outlet and install either a new metalclad power outlet supplied by your electrician or a metalclad power outlet you provide yourself.
Metalclad power outlets supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual power outlet supplied may look different.
Available Options:
Single Metalclad Socket.
Double Metalclad Socket.
Single Metalclad USB Socket.
Metalclad Cooker Switch with Socket.
Metalclad Fused Flex Outlet.
Included:
Selected power outlet if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the power outlet to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a metalclad power outlet yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. conduit / swa).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing external power outlet and install either a new external power outlet supplied by your electrician or an external power outlet you provide yourself.
External power outlets supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual power outlet supplied may look different.
Available Options:
Your Own External Socket.
Your Own Commando Socket
External Single Socket
External Double Socket.
External 16A 3 Pin Commando Socket.
External 16A 3 Pin Interlocking Commando Socket.
External 32A 3 Pin Commando Socket.
External 32A 3 Pin Interlocking Commando Socket.
Included:
Selected power outlet if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the power outlet to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying an external power outlet yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. conduit / swa).
Replacement of existing glands.
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing internal power switch/isolator faceplate and install either a new faceplate supplied by your electrician or a faceplate you provide yourself.
Power switch/isolator faceplates supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual switch/isolator supplied may look different.
Available Options:
Your Own Internal Power Switch / Isolator Faceplate Only.
Internal Extractor Fan Wall Isolator Faceplate Only.
Internal Extractor Fan Ceiling Isolator Faceplate Only.
Internal 13A Fused Switch Faceplate Only.
Internal 13A Fused Switch + Neon Faceplate Only.
Internal 13A Fused Switch with Flex Outlet + Neon Faceplate Only.
Internal 20A Heater Switch Faceplate Only.
Internal 20A Heater Switch + Neon Faceplate Only.
Square Cooker / Shower Switch Faceplate Only.
Square Cooker / Shower Switch + Neon Faceplate Only.
Tall Cooker / Shower Switch Faceplate Only.
Tall Cooker / Shower Switch + Neon Faceplate Only.
Cooker Switch with Socket Faceplate Only.
Cooker Switch with Socket + Neon Faceplate Only.
Ceiling Shower Pull Switch Faceplate Only.
Included:
Selected power switch / isolator faceplate only if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the power switch/isolator to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a power switch/isolator yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing power switch/isolator faceplate + backbox and install either a new faceplate + backbox supplied by your electrician or a faceplate + backbox you provide yourself.
Power switch/isolator faceplates + backboxes supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual power switch/isolator + backbox supplied may look different.
Available Options:
Your Own Internal Power Switch / Isolator Faceplate + Backbox.
Internal Extractor Fan Wall Isolator Faceplate + Backbox.
Internal Extractor Fan Ceiling Isolator Faceplate + Backbox.
Internal 13A Fused Switch Faceplate + Backbox.
Internal 13A Fused Switch + Neon Faceplate + Backbox.
Internal 13A Fused Switch with Flex Outlet + Neon Faceplate + Backbox.
Internal 20A Heater Switch Faceplate + Backbox.
Internal 20A Heater Switch + Neon Faceplate + Backbox.
Square Cooker / Shower Switch Faceplate + Backbox.
Square Cooker / Shower Switch + Neon Faceplate + Backbox.
Tall Cooker / Shower Switch Faceplate + Backbox.
Tall Cooker / Shower Switch + Neon Faceplate + Backbox.
Cooker Switch with Socket Faceplate + Backbox.
Cooker Switch with Socket + Neon Faceplate + Backbox.
Ceiling Shower Pull Switch Faceplate + Backbox.
Included:
Selected power switch/isolator faceplate + backbox if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the power switch/isolator to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a power switch/isolator + backbox yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing metalclad power switch/isolator and install either a new metalclad power switch/isolator supplied by your electrician or a metalclad power switch/isolator you provide yourself.
Metalclad power switch/isolators supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual power switch/isolator supplied may look different.
Available Options:
Metalclad Extractor Fan Isolator.
Metalclad 13A Fused Switch.
Metalclad 13A Fused Switch + Neon.
Metalclad 13A Fused Switch with Flex Outlet.
Metalclad 13A Fused Switch with Flex Outlet + Neon.
Metalclad 20A Heater Switch.
Metalclad 20A Heater Switch + Neon.
Metalclad Square Cooker / Shower Switch + Neon.
Metalclad Tall Cooker / Shower Switch + Neon.
Metalclad Cooker Switch with + Neon.
Included:
Selected power switch/isolator if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the power switch/isolator to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a metalclad power switch/isolator yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. conduit / swa).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing external power switch/isolator and install either a new external power switch/isolator supplied by your electrician or an external power switch/isolator you provide yourself.
External power switch/isolator supplied by your electrician will be midrange with the functions/characteristics as described.
The images displayed are for illustration only, the actual power switch/isolator supplied may look different.
Available Options:
Your Own External Power Isolator.
External 13A Fused Switch.
External 20A Switch.
External 20A Rotary Isolator.
External 32A Rotary Isolator.
Included:
Selected power switch/isolator if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the power switch/isolator to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying an external power switch/isolator yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g.. Conduit / swa).
Replacement of existing glands.
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing fire/co detector and install either a detector supplied by your electrician or a detector you provide yourself.
Fire/co detectors supplied by your electrician will be Grade D1 with the functions/characteristics as described.
The images displayed are for illustration only, the actual detector supplied may look different.
Available Options:
Your Own CO / Heat / Smoke Detector.
Grade D1 Interlinked Smoke Detector.
Grade D1 Interlinked Heat Detector.
Grade D1 Interlinked Carbon Monoxide Detector.
Grade D1 Interlinked Heat + Carbon Monoxide Detector.
Included:
Selected detector if applicable.
Modification/correction to existing connections as necessary.
Standard fixings.
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the detector to be replaced.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Electrical supply to the property may need to be interrupted during work.
If you are supplying a detector yourself, it must be suitable and safe.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove the existing main distribution gear to a single residence and install a new domestic consumer unit.
The consumer unit supplied by your electrician will be midrange and fully compliant with the current BS7671 Wiring Regulations.
The new consumer unit will be fire retardant with surge protection and individual Type A RCBO protection to each circuit.
Available Sizes:
SMALL – 10 ways. Minimum space required: Height 300mm – Width 350mm – Depth 150mm.
MEDIUM – 14 ways. Minimum space required: Height 410mm – Width 330mm – Depth 150mm.
LARGE – 20 ways. Minimum space required: Height 520mm – Width 330mm – Depth 150mm.
It is recommended to select a size which will leave at least 2 spare ways for future additions.
The images displayed are for illustration only, the actual consumer unit supplied may look different.
This package is not suitable for…
Non-Residential Property.
High Rise Residential Buildings (7 Storeys or more / 18m or higher).
Purpose Built Student Accommodation.
Houses in Multiple Occupation (HMO).
Care Homes.
Included:
BS7671 Compliant Consumer unit.
Standard entry glands/backing plate as necessary.
Standard fixings.
Modified/extended supply tails (up to 3m), as necessary.
Modified/extended main earth conductor (up to 3m), as necessary.
Modified/extended final circuit conductors within the consumer unit, as necessary.
Type 1&2 Surge Protector.
Type A RCBO devices to each circuit as necessary.
Blank modules (if required).
Final circuit testing.
Circuit labeling.
BS7671 Compliant Electrical Installation Certificate.
Part P Building Control Compliance Notification & Certificate.
Requirements:
Sufficient space to accommodate the new consumer unit.
Clear unhindered access to the incoming electrical supply & meter.
Clear unhindered workspace around the main distribution gear.
Clear unhindered access to all electrical points and outlets throughout the property.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Existing bonding conductors to gas/water/oil services must be present and sufficient.
Only safe/compliant circuits can be reconnected to the new consumer unit.
Electrical supply to the property will be disconnected during work.
Not Included:
Removal of any existing structures which hinder sufficient access to existing distribution gear.
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking / conduit / swa).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Modification/upgrading to existing, or installation of a new earth electrode, if required.
Modification/upgrading to existing, or installation of new bonding to gas/water/oil services, if required.
Modification/upgrading/repair to final circuits which are unsafe for reconnection to the new consumer unit.
Waste disposal.
Provision of temporary power supply whilst the work is being undertaken.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Disconnect and remove an existing sub distribution (garage) unit to a residential extension or outhouse and install a new domestic sub distribution consumer unit.
The consumer unit supplied by your electrician will be midrange and fully compliant with the current BS7671 Wiring Regulations.
The new consumer unit will be fire retardant with surge protection and individual Type A RCBO protection to each circuit.
Available Sizes:
SMALL – 2 ways. Minimum space required: Height 300mm – Width 200mm – Depth 150mm.
MEDIUM – 6 ways. Minimum space required: Height 410mm – Width 280mm – Depth 150mm.
It is recommended to select a size which will leave at least 1 spare way for future additions.
The images displayed are for illustration only, the actual consumer unit supplied may look different.
This package is not suitable for…
Non-Residential Property.
High Rise Residential Buildings (7 Storeys or more / 18m or higher).
Purpose Built Student Accommodation.
Houses in Multiple Occupation (HMO).
Care Homes.
Included:
BS7671 Compliant Consumer unit.
Standard entry glands/backing plate as necessary.
Standard fixings.
Modified/extended final circuit conductors within the consumer unit, as necessary.
Type 2 Surge Protector.
Type A RCBO devices to each circuit as necessary.
Blank modules (if required).
Final circuit testing.
Circuit labeling.
BS7671 Compliant Electrical Installation Certificate.
Part P Building Control Compliance Notification & Certificate.
Requirements:
Sufficient space to accommodate the new consumer unit.
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the new consumer unit.
Clear unhindered access to all electrical points and outlets being supplied by the new consumer unit.
Existing electrical supply must be sufficient and in a safe/compliant condition.
Existing bonding conductors to gas/water/oil services must be present and sufficient.
Only safe/compliant circuits can be reconnected to the new consumer unit.
Electrical supply to the outhouse/extension will be disconnected during work.
Electrical supply to the rest of the property may need to be interrupted during work.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking / conduit / swa).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Modification/upgrading to existing, or installation of a new earth electrode, if required.
Modification/upgrading to existing, or installation of new bonding to gas/water/oil services, if required.
Modification/upgrading/repair to final circuits which are unsafe for reconnection to the new consumer unit.
Waste disposal.
Provision of temporary power supply whilst the work is being undertaken.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Ideal for dark storage areas, attics or passageways in a domestic environment.
A new fused unit will be installed next to a conveniently close socket or power source, then white plastic trunking (containing a new power cable) run from the new fused unit to where the new light fitting is to be installed.
This package is based on the assumption that the trunking will be run horizontally and/or vertically on the same surface as the existing power source, and then in a straight line along the ceiling to the required location, with an overall length of 6m. (Extra length can be purchased if required)
A wall mounted rocker switch or ceiling mounted pull switch can be located anywhere along the length.
Available Options:
6inch Pendant with a Wall Switch.
6inch Pendant with a Ceiling Pull Switch.
Batten Holder with a Wall Switch.
Batten Holder with a Ceiling Pull Switch.
5ft Strip Light with a Wall Switch.
5ft Strip Light with a Ceiling Pull Switch.
The images displayed are for illustration only, the actual light supplied may look different.
This package is not suitable for…
Non-Residential Properties.
Areas containing a bath, shower, hot tub, swimming pool or sauna.
Included:
Modification/correction to existing connections as necessary.
Standard fixings.
Fused unit with surface mount backbox.
White PVC Trunking as required.
Cable as required.
Single gang white plastic switch with surface mount backbox.
Accessory mounting plates as required.
Standard midrange light fitting as selected.
Light bulb if required.
BS7671 Compliant Minor Electrical Installation Works Certificate.
Part P Building Control Compliance Notification & Certificate if applicable.
Requirements:
Mounting surfaces must be capable of receiving the new fixtures and trunking runs.
The area must be weather tight and suitable for standard internal electrical fittings.
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace throughout the work area.
Existing electrical supply must be sufficient and in a safe/compliant condition particularly including presence of sufficient RCD protection and bonding to gas/water/oil services.
Electrical supply to the property may need to be interrupted during work.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Ideal for where additional sockets or a fixed power supply are required in a domestic environment.
White plastic trunking (containing a new power cable) will be installed from a conveniently close socket or power source to where the new power outlet is to be installed.
This package is based on the assumption that the trunking will be run horizontally and/or vertically on the same surface as the existing power source for up to 3m in length. (Extra length can be purchased if required).
Available Options:
13A Fused Switch with Flex Outlet
13A Single Socket.
13A Double Socket.
13A Triple Socket
13A Single Socket with USB.
13A Double Socket with USB.
The images displayed are for illustration only, the actual power outlet supplied may look different.
This package is not suitable for…
Non-Residential Properties.
High Rise Residential Buildings (7 Storeys or more / 18m or higher).
Purpose Built Student Accommodation.
Houses in Multiple Occupation (HMO).
Care Homes.
Areas containing a bath, shower, hot tub, swimming pool or sauna.
Included:
Modification/correction to existing connections as necessary.
Standard fixings.
White PVC Trunking as required.
Cable as required.
Standard midrange power outlet faceplate with surface backbox as selected.
BS7671 Compliant Minor Electrical Installation Works Certificate.
Part P Building Control Compliance Notification & Certificate if applicable.
Requirements:
Mounting surfaces must be capable of receiving the new fixtures and trunking runs.
The area must be weather tight and suitable for standard internal electrical fittings.
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace throughout the work area.
Existing electrical supply must be sufficient and in a safe/compliant condition particularly including presence of sufficient RCD protection and bonding to gas/water/oil services.
Electrical supply to the property may need to be interrupted during work.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Ideal for domestic residential properties that do not currently have mains powered fire / co detection.
A new detector can be installed on a ceiling within a 1m radius of an existing accessible light fitting.
The existing light fitting will be removed and a new cable fed in the void above the ceiling to the location of the new detector and the existing light fitting re-installed.
Any number and combinations of detectors can be installed and interconnected using built-in radio frequency communication to achieve the desired level of protection.
Available Options:
Smoke Detector Grade D1 (built in 10yr lithium battery)
Heat Detector Grade D1 (built in 10yr lithium battery)
CO Detector Grade D1 (built in 10yr lithium battery)
Heat & CO Detector Grade D1 (built in 10yr lithium battery)
The images displayed are for illustration only, the actual light supplied may look different.
This package is not suitable for…
Non-Residential Properties.
Areas containing a bath, shower, hot tub, swimming pool or sauna.
Included:
Modification/correction to existing connections as necessary.
Standard fixings.
Cable as required.
Standard midrange RF Grade D1 detector as selected.
BS7671 Compliant Minor Electrical Installation Works Certificate.
BS7671 Compliant Certificate of Design, Installation & Commissioning of a Fire Detection System.
Part P Building Control Compliance Notification & Certificate if applicable.
Requirements:
Existing light fitting must contain a permanent live power supply.
There must be a void above the ceiling between the existing light and the required location for the new detector.
Mounting surfaces must be capable of receiving the new fixtures and trunking runs.
The area must be weather tight and suitable for standard internal electrical fittings.
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace around the work area(s).
Existing electrical supply must be sufficient and in a safe/compliant condition particularly including presence of sufficient RCD protection and bonding to gas/water/oil services.
Electrical supply to the property may need to be interrupted during work.
Not Included:
Alterations to surrounding/mounting structures.
Alterations to associated containment systems (e.g. trunking).
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Ideal for dark external areas or non-weathertight outhouses in a domestic property.
A new fused unit will be installed next to or directly back to back with a suitable socket or power source already located on an external wall.
PVC conduit (containing a new power cable) will run from the new fused unit to where the new light fitting is to be installed.
This package is based on the assumption that the conduit will be run horizontally and/or vertically on the external side of the same wall as the existing power source, with an overall length of 3m. (Extra length can be purchased if required).
For Coach Lanterns – cable run will be installed on the internal side of the wall in white pvc trunking.
For lights without a PIR sensor, A wall mounted internal or external switch can be located anywhere along the length.
Available Options:
Flood Light with PIR sensor.
Flood Light with Internal or External Switch.
Tall Bulkhead with PIR sensor.
Tall Bulkhead with Internal or External Switch.
Round Bulkhead with PIR sensor.
Round Bulkhead with Internal or External Switch.
Coach Lantern with PIR sensor.
Coach Lantern with Internal Switch.
The images displayed are for illustration only, the actual light supplied may look different.
This package is not suitable for…
Non-Residential Properties.
Included:
Modification/correction to existing connections as necessary.
Standard fixings.
PVC Conduit as required.
Conduit Clips.
Conduit Couplers as required.
Cable as required.
IP Enclosures as required.
Internal or External single gang switch as selected.
Standard midrange external light as selected.
BS7671 Compliant Minor Electrical Installation Works Certificate.
Part P Building Control Compliance Notification & Certificate.
Requirements:
Mounting surfaces must be capable of receiving the new fixtures and trunking runs.
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace throughout the work area.
Existing electrical supply must be sufficient and in a safe/compliant condition particularly including presence of sufficient RCD protection and bonding to gas/water/oil services.
Electrical supply to the property may need to be interrupted during work.
Not Included:
Alterations to surrounding/mounting structures.
Repair to weak or blown render if disturbed during drilling.
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Ideal for providing easy access to a small power supply (up to 16A) in external areas or non-weathertight outhouses in a domestic property.
A new power outlet can be installed directly back to back with a suitable socket or power source already located on an external wall.
Alternatively, an IP enclosure can be installed directly back to back with the power source and PVC conduit (containing a new power cable) run horizontally and/or vertically on the same surface up to 3m to where the new power outlet is required. (Extra length can be purchased if required).
Available Options:
13A Double External Socket Back to Back.
13A Double External Socket up to 3m+.
16A 3 Pin Commando Socket Back to Back.
16A 3 Pin Commando Socket up to 3m+.
16A 3 Pin Interlocking Commando Socket Back to Back.
16A 3 Pin Interlocking Commando Socket up to 3m+.
The images displayed are for illustration only, the actual power outlet supplied may look different.
This package is not suitable for…
Non-Residential Properties.
High Rise Residential Buildings (7 Storeys or more / 18m or higher).
Purpose Built Student Accommodation.
Houses in Multiple Occupation (HMO).
Care Homes.
Included:
Modification/correction to existing connections as necessary.
Standard fixings.
PVC Conduit as required.
Conduit Clips.
Conduit Couplers as required.
Cable as required.
IP Enclosures as required.
Standard midrange external power outlet as selected.
BS7671 Compliant Minor Electrical Installation Works Certificate.
Part P Building Control Compliance Notification & Certificate.
Requirements:
Mounting surfaces must be capable of receiving the new fixtures and trunking runs.
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace throughout the work area.
Existing electrical supply must be sufficient and in a safe/compliant condition particularly including presence of sufficient RCD protection and bonding to gas/water/oil services.
Electrical supply to the property may need to be interrupted during work.
Not Included:
Alterations to surrounding/mounting structures.
Repair to weak or blown render if disturbed during drilling.
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Ideal for connecting hot tubs, providing sub distribution power to weathertight outhouses or large supplies to external areas in a domestic property.
A new IP enclosure will be installed directly back to back with the property’s main consumer unit and then Steel Wire Armoured (SWA) cable will be run on the same surface up to 5m to where the new power supply is required. (Extra length can be purchased if required).
For hot tubs, an isolation switch can be located anywhere along the cable run up to 2m before the hot tub.
Available Options:
Power supply to a hot tub..
32A Interlocking Commando Socket
40A 2 Way Sub Distribution.
The images displayed are for illustration only, the actual parts supplied may look different.
This package is not suitable for…
Non-Residential Properties.
High Rise Residential Buildings (7 Storeys or more / 18m or higher).
Purpose Built Student Accommodation.
Houses in Multiple Occupation (HMO).
Care Homes.
Included:
Standard fixings.
SWA Cable as required.
Cable Cleats as required.
SWA Glands as required.
IP Enclosures as required.
Standard midrange external power outlet / Isolator / sub distribution unit as selected.
Connection of hot tub (if applicable).
BS7671 Compliant Electrical Installation Certificate.
Part P Building Control Compliance Notification & Certificate.
Requirements:
Spare way inside the existing main consumer unit with a suitably rated protective device.
Mounting surfaces must be capable of receiving the new fixtures and trunking runs.
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace throughout the work area.
Existing electrical supply must be sufficient and in a safe/compliant condition particularly including presence of sufficient RCD protection and bonding to gas/water/oil services.
Electrical supply to the property may need to be interrupted during work.
Sub distribution board (if selected) must be installed in a weathertight environment.
Hot tubs must be suitable and safe for connection.
Not Included:
New consumer unit protective device (if required)
Alterations to surrounding/mounting structures.
Repair to weak or blown render if disturbed during drilling.
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Install a new power supply to an EV Charger (Charger not supplied)
A new IP enclosure will be installed directly back to back with the property’s main consumer unit and then EV data cable will be run on the same surface up to 5m to where the new EV charger is required. (Extra length can be purchased if required).
The images displayed are for illustration only, the actual parts supplied may look different.
This package is not suitable for…
Non-Residential Properties.
High Rise Residential Buildings (7 Storeys or more / 18m or higher).
Purpose Built Student Accommodation.
Houses in Multiple Occupation (HMO).
Care Homes.
Included:
Modification/correction to existing connections as necessary.
Standard fixings.
EV Data Cable as required.
Cable Cleats as required.
Cable Glands as required.
IP Enclosures as required.
Connection of EV Charger.
BS7671 Compliant Electrical Installation Certificate.
Part P Building Control Compliance Notification & Certificate.
Requirements:
Spare way inside the existing main consumer unit with a suitably rated protective device.
The required location of the new EV charger must comply with regulation requirements.
Mounting surfaces must be capable of receiving the new fixtures and trunking runs.
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered workspace throughout the work area.
Existing electrical supply must be sufficient and in a safe/compliant condition particularly including presence of sufficient RCD protection and bonding to gas/water/oil services.
Electrical supply to the property may need to be interrupted during work.
EV charger must be suitable and safe for connection.
Not Included:
Charger app / wifi setup (if required)
Alterations to surrounding/mounting structures.
Repair to weak or blown render if disturbed during drilling.
Additional/non-standard fixings.
Modification/upgrading of existing electrical supply.
Waste disposal.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
This service will identify the cause of tripping problems or parts of your system that have either stopped working or do not work as intended.
If the problem is caused by a simple issue such as a loose connection, your electrician will correct the fault. Otherwise, the affected part of the system will be disconnected so that all other parts of the system can be re-energised and continue to work as normal.
Your electrician will then advise you of the work and likely costs involved to permanently resolve the issue.
Included:
Diagnosis of the fault.
Correction of simple issues (such as remaking bad connections).
Requirements:
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered access to any affected electrical accessories. (e.g. sockets, switches etc).
Electrical supply to the property may need to be fully disconnected during testing procedures.
EV charger must be suitable and safe for connection.
Not Included:
Replacement of faulty cabling or accessories.
Modification/upgrading of the existing electrical system.
Waste disposal if applicable.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
An Electrical Installation Condition Report (EICR) is a testing & inspection procedure prescribed by the BS7671 Wiring Regulations. It is intended to determine the overall safety of the electrical system and identify any issues which need to be addressed.
An overall statement of either “Satisfactory” or “Unsatisfactory” will be made.
A “Satisfactory” outcome means that the system is safe for continued use under the current conditions for a period specified by the inspector. This is usually 5 years but could vary depending on findings.
An “Unsatisfactory” outcome means that there are serious safety concerns which need to be corrected. The inspector will advise how urgently such issues need to be addressed.
In addition to the ‘overall outcome’, the inspector will provide a checklist of all items tested / inspected along with a schedule of test results and a list of observations.
Available Options:
Single Room Bedsit Vacant.
Single Room Bedsit Occupied.
1-Bed Residence Vacant.
1-Bed Residence Occupied.
2-Bed Residence Vacant.
2-Bed Residence Occupied.
3-Bed Residence Vacant.
3-Bed Residence Occupied.
If Occupied…
All occupants of the property should be prepared for…
Loss of power during the testing and expectation procedures.
The inspector repetitively accessing all areas of the property.
Long test leads trailing through the property.
If Vacant…
The property should be completely vacant of all occupants, furniture, stored items or other trades people.
Included:
Inspection & testing of the entire electrical system.
BS7671 Compliant Electrical Installation Condition Report
Requirements:
Access to a copy of any previous EICRs and/or electrical installation certificates.
Clear unhindered access to the main incoming supply cable and meter..
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered access to incoming water stop tap/gas meter/oil meter as applicable.
Clear unhindered access to all electrical points. (e.g. sockets, switches, light fittings etc).
Electrical supply to the property will be fully disconnected during testing procedures.
Not Included:
Alterations to structures in order to access points listed above.
Testing/inspection of non-fixed appliances.
Diagnosis of any known/discovered faults.
Repair/correction/modification/upgrading of the existing electrical system.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
An Electrical Installation Condition Report (EICR) is a testing & inspection procedure prescribed by the BS7671 Wiring Regulations. It is intended to determine the overall safety of the electrical system and identify any issues which need to be addressed.
An overall statement of either “Satisfactory” or “Unsatisfactory” will be made.
A “Satisfactory” outcome means that the system is safe for continued use under the current conditions for a period specified by the inspector. This is usually 5 years but could vary depending on findings.
An “Unsatisfactory” outcome means that there are serious safety concerns which need to be corrected. The inspector will advise how urgently such issues need to be addressed.
In addition to the ‘overall outcome’, the inspector will provide a checklist of all items tested / inspected along with a schedule of test results and a list of observations.
Included:
Inspection & testing of the entire electrical system.
BS7671 Compliant Electrical Installation Condition Report
Requirements:
The property should be completely vacant of all occupants, furniture, stored items or other trades people.
Access to a copy of any previous EICRs and/or electrical installation certificates.
Clear unhindered access to the main incoming supply cable and meter..
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered access to incoming water stop tap/gas meter/oil meter as applicable.
Clear unhindered access to all electrical points. (e.g. sockets, switches, light fittings etc).
Electrical supply to the property will be fully disconnected during testing procedures.
Not Included:
Alterations to structures in order to access points listed above.
Testing/inspection of non-fixed appliances.
Diagnosis of any known/discovered faults.
Repair/correction/modification/upgrading of the existing electrical system.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
An Electrical Installation Condition Report (EICR) is a testing & inspection procedure prescribed by the BS7671 Wiring Regulations. It is intended to determine the overall safety of the electrical system and identify any issues which need to be addressed.
An overall statement of either “Satisfactory” or “Unsatisfactory” will be made.
A “Satisfactory” outcome means that the system is safe for continued use under the current conditions for a period specified by the inspector. This is usually 5 years but could vary depending on findings.
An “Unsatisfactory” outcome means that there are serious safety concerns which need to be corrected. The inspector will advise how urgently such issues need to be addressed.
In addition to the ‘overall outcome’, the inspector will provide a checklist of all items tested / inspected along with a schedule of test results and a list of observations.
All occupants of the property should be prepared for…
Loss of power during the testing and expectation procedures.
The inspector repetitively accessing all areas of the property.
Long test leads trailing through the property.
Included:
Inspection & testing of the entire electrical system.
BS7671 Compliant Electrical Installation Condition Report
Requirements:
Access to a copy of any previous EICRs and/or electrical installation certificates.
Clear unhindered access to the main incoming supply cable and meter..
Clear unhindered access to the main consumer unit/fuse box.
Clear unhindered access to incoming water stop tap/gas meter/oil meter as applicable.
Clear unhindered access to all electrical points. (e.g. sockets, switches, light fittings etc).
Electrical supply to the property will be fully disconnected during testing procedures.
Not Included:
Alterations to structures in order to access points listed above.
Testing/inspection of non-fixed appliances.
Diagnosis of any known/discovered faults.
Repair/correction/modification/upgrading of the existing electrical system.
Your electrician may be willing to provide a price for undertaking some or all of the services not included above, if required.
Steffan is highly electrically competent and has a wealth of knowledge from previously working as a house renovator, helping massively to retrofit installations sympathetically into occupied properties.
I had Steffan round for a week to install structured network cabling in my 120 year old house, and you could barely tell he’s been here with everything put back so neatly.
Steffan successfully completed running 15 network cables over 3 routes, one involving cutting a hidden channel under the trim of a large door and window, another fishing under a suspended wooden floor, and the main route notching out under the stairs and heading to the upper levels of the property.
We were also able to complete 2 runs of single mode fibre as a future proofing exercise, not intended for immediate use.
I performed the terminations myself, but I’m sure Steffan would provide this service for anyone who didn’t want to do it!
The pictures on this review show a work in progress, many of the patch panel terminations have since been redone to have the cable lengths more aesthetically pleasing.
I wouldn’t hesitate to get Steffan involved with any future projects, and have already recommended his work to friends.
We recently had a broken light in our downstairs toilet, which turned out to be dangerous. Steffan got to the bottom of the issue very quickly.
I highly recommend Steffan for his attention to detail, value for money and how respectful he is in our home. Thank you Steffan, we will not hesitate to use you again.
Outstanding service from Steff. He came to place data cables from my router to the router in my office so I had a stable wired connection while working from home.
Steff was wife friendly, child friendly and dog friendly. Wouldn’t hesitate to recommend.
![Tim Phillips [Electrician]](https://lh3.googleusercontent.com/a/ACg8ocJQ2Z5VC4Cv7pNSdaBsWA4uKQ14dS_bsfQcaNwSaKn_HxckRQ=s40-c-rp-mo-br100){kind=small}
Fantastic service and very efficient! Turned up when promised and did a great job! Would highly recommend
I have used Fusebox Wales for the last 8 years to undertake a wide range of electrical work , from a full domestic re-wiring to changing light fittings, to wiring a cooker!
Tim always turns up when he says he will, charges what he said he would and clears up. I have never had to recall him because of a fault with his work.
Would absolutely recommend !
With Tim you get exactly what it says on the tin: he comes when he says he will: he does the work that he has agreed to carry out and he does it at the price you expected. He is friendly, open and cooperative, offering ideas and suggestions for improvements at realistic costs. I am assured by his competence and confident that the work he carries out meets the regulations as well as being safe and properly executed. If you want a n electrician you can trust, wait until Time is free to do your job: you’ll be glad you waited.
Truly professional and knowledge service completed on the date and time booked. Also sound advice given. We have no hesitation to reccomend Fusebox Wales and to choose them for any future electric work. Many Thanks
We’ve used Fusebox twice for substantial amounts of work in 2 houses. On each occasion we’ve been very pleased with the high standard of work. In addition the excellent communication and reliability that Tim provides makes life so much easier, and is a cut above the usual. Wouldn’t hesitate to recommend or use again.
We have been using Fusebox Wales for many years now and have to say there service from first contact to completion of works provides us with a first class service with reliability with reasonable costs. Nothing is to much trouble for Tim, and we will continue to use them for many yeas to come.
Fusebox Wales have an excellent service giving a price that was adhered too and turned up to the job when they advised they would.
Very knowledgeable offering us solutions for the work and above all clean.
Booked on website. Had an email confirming the appointment. Tim arrived on time, as promised and fixed our pantry lights. Great service and good value. Thank you! Would thoroughly recommend. Have saved Tim’s number for future use.
Tim is always professional, efficient, thorough, and friendly. Clearly knows what he is doing, and can explain any work layman’s terms. Reliable and great to work with! :)
We bless the day I finally found the excellent, concise, clear, informative website of Tim Phillips’ ‘Fusebox Wales’. We had a small electrical enquiry, regarding a faulty wall light. Previous enquiries with other electricians had us ‘let down’ (non appearance after pre-arranged appointment or swooning from verbal projections on suggestions of what was causing the fault and how much it might cost.) Tim’s website easily pointed us in the right direction. Posting him an enquiry, via the website provided us with an immediate email response. Soon we had an offer of a time&date for him to visit our home. Tim was punctual, courteous and after a thorough inspection of the electrical fault (failed connection to the wall light) came up with what he could do to repair . This even included suggested change to L.E.D lighting , something I had briefly previously considered. In all, he was here at least an hour & 15 minutes (working all that time on the electrics) and we were more than satisfied by the cost and service. He even emailed later to check on our satisfaction with his work. Yes, a trusty & reliable Electrician, the customer knows, if needed, they will totally employ again!
I have been working with Tim from Fusebox Wales for over 15 years, assisting us with all the legal complexities around electrical safety and residential lettings. I completely trust his judgement, and his professionalism is second to none. I regularly recommend Tim to friends, clients etc and use him on all my own properties too.
